In order to determine a suitable SolidStep Manual Fold-Down RV Step for a Forest River R-Pod Travel Trailer you'll first need to measure the doorway width (inner most point to inner most point) followed by the threshold height (ground to floor of trailer where step mounts). The SolidStep Manual Fold-Down RV Steps part # LC713662 for example are designed for a doorway width up to 24" with a threshold height between 22" and 28".
I have attached our full list of step options below if this... view full answer...
The stored depth of this step from the center of the front mounting hole to the back of the slide bracket measures 11 inches. The height of the step will be 7 inches when it is stored. I have attached diagrams showing these measurements.
To make sure this step will work for you, you will want to make sure that you have at least 11 inches behind the mounting location of the front bolt hole to install this step. As long as you have the 11 inches behind the front bolt hole, this step should... view full answer...
Is the overall width of the base 26 inches or is that the center to center distance between the mounting holes? Because if it is the mounting hole distance then steps # LC432687 will fit but the overall width is 27-1/2 inches.
The other issue is that when you add additional steps it makes them closer to the ground when stowed. This reduces ground clearance and can result in loss of steps.
An alternative is to use a portable step such as # S-150 that you can keep in the RV/trailer and... view full answer...
You're correct that you need 5th wheel replacement steps to extend down from the mounting point the same distance as the original steps do. This will avoid loss of ground clearance which is an important safety consideration.
Trailer makers typically do not provide detailed specs on components such as steps that are used in their products but you can use the linked page to see our range of 4-step scissor steps. Brophy step # AS24 is 24-inches wide like yours, offers a 7-7/8-inch step height... view full answer...
I recommend going with our Lippert Manual Pull-Out Steps for RV - Double - 7" Drop/Rise - 24-1/4" Wide – Aluminum, Item # LC432682. This 2-step model provides two grip strips for sure footing, anodized aluminum rustproof step platforms, and a 7 inch drop/rise, which should be easier for your wife to climb.
Our manual Lippert single steps all have 24x4 inch bolt hole patterns. Based on these dimensions and the information you provided, we are assuming your current Lippert step has the... view full answer...
A step like the TorkLift GlowStep Camper Scissor Steps # TLA7802 will be the best option that we have. There is not any sort of database or anything that tells us the correct steps for cargo trailers or RV's. You would need to know your entry height and width.
For instance the TorkLift GlowStep Camper Scissor Steps # TLA7802 fits an entry height of 16" - 23" which is the lowest we have and a width of 20". view full answer...
First, great trailer name. The closest we come to the mounting pattern you said you have on your Layton trailer for steps is part # SMFP-2120. These steps have a mounting base dimension of 23-5/8 inches wide and 8 inches deep.
These steps are 20-1/2 inch wide x 7 inches deep, and have a 350-lb weight capacity. This is a 2-step assembly. view full answer...
There are a couple of support straps at the top step/landing that would likely be in the way and prevent Econo Porch Trailer Step # EHS-103-R from fitting around your existing steps. The height from the ground to the top step is 27-1/2 inches. From the ground to where that strap starts is about 18-1/2 inches. If those support straps weren't there then it would most likely work. view full answer...
I do have options for you but the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise part # LC432698 (358991 is the manufacturer part number) will not fit properly because the opening on your trailer is 28" and the frame of the steps is 28" the fit will be too snug.
I recommend to use Flexco Manual Pull-Out Steps for RVs part # SMFP-2100 which is 27-5/8" wide for a perfect fit on your trailer if you want to utilize the space under the door for a pull out step. There is not a quad... view full answer...
In order to confirm fit of a set of pull-out steps you'll need to know the width of the step mounting brackets already on the trailer and the entry height which is the distance from the bracket to the ground. The Alumi-Tread Manual Pull-Out Step for RVs part # LC432696 for example fit a 27-1/2" wide mounting bracket and 24-1/2" entry height.
I have attached a full list of our three steps options below if the above don't match up. view full answer...
I wish we had something as we get this request a lot but all of the scissor step kits out there like the Brophy Scissor Steps part # AS03 have a higher amount of rise between the steps at around 8 inches like this one. Now with that said since this step set has a range of 24 inch to 30 inch and your height is 24 inches there's a good chance this would actually have a slightly lower rise between steps. view full answer...
The Lippert Manual Pull-Out Step for RVs - Triple # LC432690 might work for your Keystone trailer, but we do not have a database of each part put on each year, make and model of trailer.
To find out if these steps will work, you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting bracket to fit. These steps have mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. Otherwise, you will need to use the Outriggers for... view full answer...
We do have handrails that are going to allow for an easier way for your mom to get up the steps and into your 2016 Heartland Cyclone, the issue with changing from the Lippert SolidStep Manual Fold-Down Steps # LC791574 to a TorkLift GlowStep is the mounting brackets because none of the GlowSteps share the same mounting bracket dimensions as the Lippert steps.
What I recommend instead is keeping your current steps and instead adding a very good handrail, the Lippert Entry Assist Handrail... view full answer...
Thanks for that info, and there is one option for steps that mount on the outside of your trailer, have a 25-1/2 inch mounting bracket, and work with an entry height of 25-1/2 inches, which are TorkLift scissor steps:
- TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 3 Steps # TLA8103
The # TLA8103 have a 25-1/2" wide x 13-7/8" deep mounting bracket, have adjustable legs with foot plates that touch the ground so the steps are always stable, and are made from aluminum and... view full answer...
The SolidStep Locking RV Storage Box - Powder Coated Steel - 100 lbs # LC664640 can be used on your trailer even if you don't have the space where an old step would be located as long as you are willing to make the cut in your trailer siding if it isn't present. It will mount directly to the frame rail and give you the storage option in that location or really anywhere you want to mount it along the frame. view full answer...
You are correct that you have a 2019 Lance 2375 travel trailer, the RV industry begins to make the next model year on March 1st.
In looking at your Lance the new models come with a 2-Step TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102. My recommendation is to level your Lance and measure the height to the floor inside your door. This step is designed for a height of 18-1/2" to 28". The 3-Step # TLA8103 is designed for a 25-1/2" to 36" height. Since there is some... view full answer...
The correct set of SolidStep Manual Fold-Down Steps for a 2018 Forest River Rockwood Windjammer with 28" doorway and 36" entry height is indeed part # LC791574. This option also will give you some extra margin for the steps when parking on unlevel terrain. view full answer...
The Econo Porch Trailer Steps part # EHS-103-R-HR has a total step height of 27-1/2" which is measured from the ground to the top of the uppermost step. The total step height does not need to equal the threshold height of the camper but preferably close or slightly less. The difference between the two would be the rise/drop to the first step.
I'm not sure why you're referencing the bumper but if you can explain this for me I'd be glad to try and clarify. view full answer...
We do have Fulton single axle trailer fenders with a top and side steps for 14 inch wheels, but in either silver or black. If you're okay with that color use either of the following:
- Black: Fulton Single Axle Trailer Fenders with Top and Side Steps - 14" Wheels # F008584-2
- Silver: Fulton Single Axle Trailer Fenders with Top and Side Steps - 14" Wheels # F008594-2 view full answer...
Because most RV makers do not maintain specifications on the OEM parts such as steps that they install on their products, I cannot be sure that the TorkLift GlowStep Revolution Scissor Step w/ Landing Gear # TLA8104 will fit your Layton Trailer.
The TorkLift GlowStep Revolution has a mounting base dimension of 25-7/16 inches wide x 8 inches deep. The height from the top of step opening to the ground can be adjusted from 32-1/2 inches to 40 inches. I recommend verifying the mounting space... view full answer...
Go To Results